|
Jet 708580 JBM-5 1/2 Horsepower Bench Mortiser | 
 enlarge
| Brand: Jet
Category: Home Improvement
List Price: $421.00
Buy New: $354.99
You Save: $66.01 (16%)
New (5) Used (2) from $259.99
Rating:  67 reviews
Sales Rank: 17619
Media: Tools Hardware
Shipping Weight (lbs): 52.4
Dimensions (in): 22.5 x 14.6 x 10.8
MPN: 708580
Model: 708580
UPC: 662755139536
EAN: 0662755139536
ASIN: B0000223M4
Availability: Usually ships in 24 hours
| |
| Features:
| • | 1/2-horsepower bench mortiser; 115 volts; 1,752-rpm motor | | • | 1/2-inch chisel capacity; 4-3/4-inch head stroke; rack and pinion head | | • | Cast-iron and steel construction | | • | Includes mortiser, three bits, chuck key | | • | 44 pounds; 2-year limited warranty |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Amazon.com Review
For you furniture makers out there who find yourselves spending more time than you'd like setting up the mortising attachment on your drill press (then taking it off, again), JET's affordable benchtop mortiser ought to be a welcome addition to your woodshop's tool collection. Designed to take up to 1/2-inch chisel bits, JET's benchtop mortiser runs off a 1/2-horsepower induction motor. At only 44 pounds, the tool is sturdy but also easily maneuvered, plus it reverses on its base to allow for mortising in long stock. The 4-3/4-inch head stroke is great. Bits are easy to change. Just flip open the steel door on either side (these doors are made of flimsy plastic on some of the competition's models) to gain easy access to the chuck. And, thanks to the 4-inch chuck key, there's little chance of banging or scraping your knuckles while switching bits (a small touch, perhaps, but a nice one). We also like the quick-setting depth stop on this tool--as well as the removable toggle switch that keeps less-experienced (or child-size) hands out of harm's way. The mortiser's feed handle adjusts, too, so you can choose the most comfortable position for each application--another nice touch. Set on a heavy-duty cast-iron base with four predrilled mounting holes, this dependable machine allows any woodworker, from the beginner to the expert, to create fantastic-looking mortise-and-tenon joints. I--Justin Paul/I
Product Description
Get solid performance with a variety of features. Heavy-duty cast iron and steel construction for durability and stability. With 1/2 HP motor and 3/8" chuck capacity. Includes 1/4" , 3/8" , 1/2" bits. br brAdditional features: brTEFC motor for solid performance and trouble free operation. brThree jaw drill chuck with extended chuck key for ease of positive grip on mortise drill bit. brRack and pinion head raising and lowering allows for positive drilling control. brLong, multi-position splines allow for repositioning of feed handle for easier operation and perfect handle position on all operations. brTwo hinged side doors to allow for complete drill chuck access brRemovable safety toggle switch for prevention of accidental turn on 1/2" max. mortise chisel capacity. br brSpecifications: brMotor: 1/2 HP, 1Ph, 115V TEFC brRPM: 1725 brChuck Capacity: 3/8" brChisel Shank Capacity: 3/4" brHead Stroke: 4-3/4" brChisel Center to Fence: 3-1/2" brUnder Holddown: 4" brFence Size: 1-9/16" x 12-1/2" brBase Size: 7-5/8" x 12-3/16" brBushing Size: 5/8" 3/4" brWeight: 44 lbs br br
|
| Customer Reviews: Read 62 more reviews...
As expected-- makes square holes May 2, 2008
Granite City Green Guy (St. Cloud, MN United States)
Finally decided to try a benchtop mortiser and with the rebate the Jet looked a bit better (i.e. cheaper) than the other options. Contrary to some of the recent reviews below, mine arrived without a scratch in a pristine-looking box-- and just three days after I ordered with free shipping. Can't argue about that. This is my fifth or sixth major tool purchase from Amazon (inc. jointer and planer) and I've always had excellent experiences with their shipping service. br / br /Assembly took less than ten minutes and I was making sawdust soon after. The unit actually comes mostly assembled; all that has to be added is the arm, fence, and table. Nothing was slathered with grease! As others have noted there's a hydraulic cylinder on the head that doesn't really seem to do much, but I found the action to be relatively smooth without it. My test cuts in red oak went in easily and the bit did not clog. My next purchase will have to be the proper stone to sharpen these chisels; the were quite sharp out of the box but I'm sure will dull quickly as well. br / br /At this price point, with free shipping, I think either the Jet or Delta would be acceptable. It's not exciting but it makes square holes. If you do a lot of MT joinery or are making Craftsman furniture as I am (doing a bed this summer) it should be a real time saver. Otherwise, you may want to save the space and just use your router and a hand chisel to square off the ends.
 Jet Bench Mortiser had some quality issues April 6, 2008
J. Pritchard (Bloomfield, NY)
When I received the mortiser, there were no obvious signs of damage. However, when I opened the box I found the top fan cover was dented in so as to impede the movement of the cooling fan. It was easy to pound back out and there is no paint or structural damage but it should never have left the factory that way. Also,the post that the hold down clamp secures to has a set screw to hold it tight and that was loose from the factory. There is no wrench included to tighten it and it took a while to find one in my collection that was close enough tighten it. Just a pain in the neck. Once I got going, it performed as I would have expected although I will probably get a better set of bits than the ones included.
Good machine, bad QC April 24, 2007
Erik M. Brzoska (Pennsylvania)
4 out of 4 found this review helpful
I used my neighbors machine... he has this same machine, I was so impressed, I ordered it the next day. br /Mine arrived very quickly, amazon is great -- the packing was perfect, but the machine looked like it was assembled by monkeys! br / br /The fan and fan cover were beat up and broken and one of the screws was cross-threaded. Yeah, they are sending me new pieces, but what a bad QC job!!
 short mortiser February 7, 2007
Richard R. Bergquist
3 out of 4 found this review helpful
This is not typical Jet equipment, I have a Jet table saw, lathe and band saw, they are impressive tools. I should have read the small print with the mortiser. the throat is just enough to mortise a 2X4, in hard wood the motor jams because of wood chips, the chuck is too small 5/8ths would have been a better choice and hard to access. I did keep the machine and added a spacer for wider stock. It does work better than my drill press but not much. br /Rich
Jet Mortiser January 20, 2007
Jerry L. Jenkins Jr. (Bellingham, Wa, USA)
3 out of 5 found this review helpful
The tool works well! I am happy with its' ease of use and set up. For a low end mortiser it works very well for the occasional user. The first one I received had a caved in top due to improper packaging. I let Amazon know, and in two days I received a new replacement, at no charge. The staff at Amazon were great - it was very easy to get a new one sent quickly and have UPS pick up the one that was damaged. Thanks, Amazon for your wonderful customer support.
|
|
|
|
| |
